Troubleshooting - WGP WORR MACHINE Manuel De L'utilisateur

WORR MACHINE® MARKER OWNERS MANUAL
VII. T
ROUbLESHOOTING
NOTE:
Prior to beginning any work on your marker, check to make sure that all excess
pressure has been released by pointing the marker in a safe direction and pulling
the trigger. This is a necessary precaution due to the fact that the marker may
still contain pressure even after the removal of the gas source.
1. Gas leaks from the tank connection.
• Check and or replace tank o-ring.
2. Gas leaks from inside barrel.
• Try firing the marker a few times in a safe enviroment.
• Valve seal may be damaged, repace valve stem assembly.
3. Marker fails to fire.
• Cock the marker and try again.
• Make sure the tank has gas/air in it, and be sure it is screwed all the way on to the marker.
• Safely check for broken paint shells in chamber, lubricate all moving parts.
4. Marker fails to recock.
• Check and/or replace striker o-ring.
• Make sure the tank has gas/air in it, and be sure it is screwed all the way on to the marker.
5. Marker rapid fires or mechanism sticks or hangs up.
• Broken paintball shell stuck inside, clean the mechanism.
• Lack of lubricant, lubricate striker and bolt.

The tank o-ring is located
at the top of your tank.