Fitting Diamond Chain; How To Tension The Diamond Chain; Mounting Spray Guard - Husqvarna WSC 40 Manuel D'utilisation

8 Mount the spray guards.
9 Connect the water hose.
WARNING! Check that the assembly is
!
correct before connecting the power
cable.

Fitting diamond chain

WARNING! Never mount or dismount the
!
tool or the guards without first
disconnecting the power cable from the
saw unit. Carelessness can result in
serious personal injury or even death.
WARNING! Exercise care when
!
assembling the wall saw chain
attachment so that it does not loosen
when cutting. Carelessness can result in
serious personal injury or even death.
10 – English
ASSEMBLING AND ADJUSTMENTS

How to tension the diamond chain

WARNING! A slack diamond chain may
!
jump off and cause serious or even fatal
injury.
The correct diamond chain tension on this machine differs
from other chain saws. When the chain is perfectly
tensioned the chain is tight to the chain bar and in a
perfect circle around the chain bar. After tensioning it
should still be possible to lift up the chain so the chain
guides are parallel to the chain bar and to move the chain
easily.
Loosen the screw for the clamping washer from behind
using a 13mm t-box spanner. Use the adjustment knob to
tension the chain.
2

Mounting spray guard

The spray guard for the cutting equipment should be
mounted on the sides of the machine with rubber straps.
Spatter and sparks from the material being cut are then
collected by the guard and led away from the user.
Since the diamond chain rotation direction can be
selected, the water spray direction from the chain can
also be selected regardless of how the saw is turned on
the rail.
1