Operating; Protective Equipment - Husqvarna WSC 40 Manuel D'utilisation

Protective equipment

General
Do not use the machine unless you are able to call for
help in the event of an accident.
Personal protective equipment
You must use approved personal protective equipment
whenever you use the machine. Personal protective
equipment cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident does happen.
Ask your dealer for help in choosing the right equipment.
WARNING! The use of products such as
!
cutters, grinders, drills, that sand or form
material can generate dust and vapors
which may contain hazardous chemicals.
Check the nature of the material you
intend to process and use an appropriate
breathing mask.
Long-term exposure to noise can result
in permanent hearing impairment. So
always use approved hearing protection.
Listen out for warning signals or shouts
when you are wearing hearing
protection. Always remove your hearing
protection as soon as the engine stops.
There is always a risk of crush injuries
when working with products containing
moving parts. Wear protective gloves to
avoid body injuries.
Always wear:
• Approved protective helmet
• Hearing protection
• Approved eye protection. If you use a face shield then
you must also wear approved protective goggles.
Approved protective goggles must comply with
standard ANSI Z87.1 in the USA or EN 166 in EU
countries. Visors must comply with standard EN 1731.
• Breathing mask
• Heavy-duty, firm grip gloves.
• Tight-fitting, heavy-duty and comfortable clothing that
permits full freedom of movement. Do not wear shorts
• Boots with steel toe-caps and non-slip sole
• Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
Other protective equipment
WARNING! Sparks may appear and start
!
a fire when you work with the machine.
Always keep fire fighting equipment
handy.
• Fire Extinguisher
• First aid kit
12 – English

OPERATING

General safety precautions
!
This section describes basic safety directions for using
the machine. This information is never a substitute for
professional skills and experience. If you get into a
situation where you feel unsafe, stop and seek expert
advice. Contact your dealer, service agent or an
experienced user. Do not attempt any task that you feel
unsure of!
• Please read the operator's manual carefully and make
sure you understand the instructions before using the
machine.
• Read through the manual supplied with the power
pack before starting to use the machine.
• This machine is only intended for use together with a
Husqvarna WS 440 /WS 482. All other use is
forbidden.
• The machine can cause serious personal injury. Read
the safety instructions carefully. Learn how to use the
machine.
• Keep in mind that the operator is responsible for
accidents or hazards occuring to other people or their
property.
• All operators shall be trained in the use of the
machine. The owner is responsible for ensuring that
the operators receive training.
• The machine must be kept clean. Signs and stickers
must be fully legible.
• Save all warnings and instructions for future
reference.
!
WARNING! Please read all safety
warnings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fire and/or
serious injury.
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Never allow children or other persons
not trained in the use of the machine to
use or service it.
Never allow anyone else to use the
machine without first ensuring that they
have read and understood the contents
of the operator's manual.