Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale page 39

Service
• Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
• Follow the maintenance, control and
service instructions in this manual care-
fully.
Damaged safety equipment and parts
must be repaired or replaced profes-
sionally by our service centre, unless
otherwise indicated in the operating
instructions.
Chain saw safety warnings:
• Keep all parts of the body away
from the saw chain when the chain
saw is operating. Before you start
the chain saw, make sure the saw
chain is not contacting anything. A
moment of inattention white operating
chain saws may cause entanglement
of your clothing or body with the saw
chain.
• Always hold the chain saw with
your right hand on the rear handle
and your left hand on the front
handle. Holding the chain saw with a
reversed hand configuration increases
the risk of personal injury and should
never be done.
• Hold the power tool only on the in-
sulated handle surfaces, as the saw
chain may come into contact with
concealed power cables. Contact
between the saw chain and a live ca-
ble may render metallic components
live and result in an electric shock
• Wear safety glasses and ear pro-
tection. Other protective equipment
for the head, hands, legs and feet
is compulsory. Adequate protective
clothing will reduce personal injury
by flying debris or accidentaI contact
with the saw chain.
• Do not operate a chain saw in a
tree. Operation of a chain saw white up
in a tree may result in personal in jury.
• Always keep proper footing and
operate the chain saw only when
standing on fixed, secure and level
surface. Slippery or unstable sur-
faces such as ladders may cause a
loss of balance or control of the chain
saw.
• When cutting a branch that is under
tension be alert for spring back.
When the tension in the wood fibres is
released the spring loaded Iimb may
strike the operator and/or throw the
chain saw out of control.
• Use extreme caution when cutting
brush and saplings. The slender
material may catch the saw chain and
be whipped toward you or pull you off
balance.
• Carry the chain saw by the front
handle with the chain saw switched
off and away from your body. When
transporting or storing the chain
saw always fit the guide bar cover.
Proper handling of the chain saw will
reduce the Iikelihood of accidentaI
contact with the moving saw chain.
• Follow instructions for lubricating,
chain tensioning and changing ac-
cessories. Improperly tensioned or
lubricated chain may either break or
increase the chance for kickback.
• Keep handles dry, clean, and free
from oil and grease. Greasy, oily
handles are slippery causing loss of
control.
• Cut wood only. Do not use chain
saw for purposes not intended. For
GB
39