Intended Purpose; General Description; Extent Of The Delivery; Overview - Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale

Intended purpose

The electric chainsaw is constructed for
sawing wood only. The saw is not de-
signed for any other types of application
(e.g. cutting of brickwork, plastic or food).
The chainsaw is designed for employ-
ment in the do-it-yourselfer sector. It was
not designed for continuous employment
in the commercial sector.
The device is designed for use by adults.
Young people over 16 years old may use
the chainsaw under supervision only.
The manufacturer is not liable for damag-
es, which were caused through use in ap-
plications for which it was not designed,
or incorrect operation.
This electric chainsaw is to be used only
by one person and only for sawing wood.
The chainsaw must be held with the right
hand on the rear handle and the left hand
on the front handle. Before use, the user
must have read and understood all of the
information and directions in the operat-
ing instructions. The user must wear ap-
propriate personal protective equipment
(PPE). The chainsaw is to be used only for
sawing wood. Materials such as plastic,
stone, metal or wood containing foreign
objects (e.g. nails or screws) must not be
cut with the chain saw!

General description

The illustration how to handle the appli-
ance can be found on pages 2-4.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Chainsaw
- Chain bar (guide rail)
- Saw chain
- Saw bar protection sheath
- Oil bottle with 180 ml bio chain oil
- Instruction Manual
Dispose of the packaging material cor-
rectly.

Overview

A 1 Rear handle
2 Oil filler cap
3 Chain brake handle, front hand
guard
4 Chain bar
5 Saw chain
6 Nose sprocket
7 Fastening bolt for sprocket chain
wheel covering
8 Sprocket chain wheel covering
9 Screw for the chain quick-
tensioning system
10 Rear hand guard
11 Tension relief
12 Mains cable
13 On/off switch
14 Safety lock
15 Electric motor
16 Front handle
17 Bumper
18 Chain catcher (not visible)
19 Saw bar protection sheath
20 Oil bottle
C
21 Oil level indicator
22 Minimum mark "MIN"
on the oil level indicator
F
23 Bar bolt
24 Sprocket
25 Tab
26 Oil passages
GB
33