Symbols Used On The Saw - Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale

Symbols used on the saw

Make yourself familiar with all
control elements before any work.
Practice handling the saw and
have explained the functions,
operating methods and sawing
techniques by a practiced user or
specialist.
The motor cannot be turned on
if the chain brake has engaged.
Release the chain brake by shifting
the brake arm over against the front
grip.
Read and take note of the operat-
ing manual belonging to the ma-
chine!
Wear personal
protective equipment.
Basically, wear protective goggles
and ear protection
Wear a safety helmet!
Wear cut-resistant gloves!
Wear anti-slip safety shoes!
Use protective clothing!
Only use the saw with
both hands on the device
Caution! Spring-back - Be careful
of spring-back of the machine dur-
ing work.
Do not expose the unit to rain. The
device must not be wet, nor should
it be operated in a moist environ-
ment.
Caution! Remove the plug immedi-
ately from the plug socket in case of
damage or cutting through of the
mains cable
Information of the acoustic power
7 1
level L in dB.
WA
Graphical symbol on the nameplate:
454 mm
Length of the chain bar
Safety class II (Double insulation)
Machines do not belong with do-
mestic waste.
Graphical symbol beneath the chain
sprocket cover:
Observe direction of travel of the saw chain.
Caution! Read the operating instructions.
Graphical symbol on the oil tank
cap/ Oil level indicator:
Saw chain lubrication.
Graphical symbol on the fixing screw
for the chain sprocket cover:
OPEN
CLOSE
Graphical symbol on the chain brake
lever:
chain brake: OFF
chain brake: ON
GB
35