Storage; Waste Disposal And Environmental Protection - Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 80
GB
1. Switch off the saw and pull out
the power plug (
2. Remove the sprocket chain
wheel covering (8), the saw
chain
(5) and the chain bar (4).
3. Turn the blade around its hori-
zontal axis and install the blade
and chain as described under
"Installing the sawing chain and
blade".
When doing so, pay attention to
the correct rotation direction of
the saw chain!
Use the graphical symbol below the chain
sprocket cover (8) as a guide to the align-
ment of the saw chain (5) when the blade
is rotated. The illustrated direction of
travel on the blade is no longer true.

Storage

Clean the device prior to storage.
Empty the oil tank prior to longer peri-
ods of non-use. Dispose of used oil in
an environmentally-responsible way
(see „Disposal/Environmental Protec-
tion").
Attach the protective blade cover.
Store the device in a dry and dust-
proof location and out of reach of
children.
52
A
12).
Direction of travel of
the saw chain
Waste disposal and
environmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Labelled products must not be disposed
of with normal household waste but
must be returned to a collection point for
the recycling of electrical and electronic
equipment.
Recycling helps to reduce both the
consumption of raw materials and the
environmental impact. Information about
disposal and the location of the nearest
recycling centre may be obtained, for
example, from your local waste manage-
ment department or from Yellow Pages.
Empty the oil tank carefully and hand
in your electric chainsaw
center. The plastic and metal parts em-
ployed can be separated out and thus re-
cycled use can be implemented. Ask our
Service-Center for details.
at a disposal

Publicité

Table des Matières
loading

Table des Matières