Environmental Protection Measures; Note - EB TECHNOLOGY START-S6XL BLOCK Notice D'emploi

START-S6XL BLOCK
Premises
This manual provides all the specific information you need to fa-
miliarize yourself with and correctly operate your unit. Read it
very carefully when you purchase the instrument and consult it
whenever you have doubts regarding use and before performing
any maintenance operations.
Safety precautions
Using the unit improperly and performing repairs or modifications
personally will void the warranty. Nologo declines any respon-
sibility for damages due to inappropriate use of the product and
due to any use other than the use the product was designed for.
Nologo declines any responsibility for consequential damages
except civil liability for the products.
The gate should be conformed to the european law EN 60204-1,
EN 12445, EN 12453. It is obliged to be conformed to the norms
for the automated closing devices EN 12453, EN 12445, EN
12978 and eventaully nationa laws. The adjust of the force of the
motor should be measured with a device according to the values
of the norma EN 12453.
Environmental protection
measures
Information regarding the environment for custom-
ers within the European Union. European Directive
EC 2002/96 requires that units bearing this symbol
on the unit and/or on the packaging be disposed of
separately from undifferentiated urban wastes.
Be disposed of with the ormal household wastes. The owner is
responsible for disposing of this product and other electrical and
electronic equipment through specific waste collection facilities
indicated by the government or local public agencies. Correct
disposal and recycling help prevent any potentially negative im-
pact on the environment and human health. To receive more de-
tailed information regarding disposal of your unit, we recommend
that you contact the competent public agencies, the waste col-
lection service or the shop where you purchased the product.
Small legend
FCA / LSO
Open limit switch
FCC / LSC Close limit switch
START
Control to drive the gate
PEDONALE in sliding units: control partial opening
Vac
Alternate current
Vdc Direct current
NC
Normally closed
NA / NO Normally open
Isolated contact Isolated from power supply
Index
Par. Description
2 Description of the product
2.1 Working features
2.2 Fields of application
2.3 Technical features
3 Premises
3.1 Preliminary checks
3.2 Type of electrical wires
3.3 Connections
4 Installation of the control board
4.1 Scheme and electrical connections
4.2 Connection of the network tension
4.3 Motor connection
4.4 Connection of the signal light
4.5 Connection of a 24Vdc light
4.6 Connection of Courtesy light
4.7 Connection of ANTENNA
4.8 Connection of arrest devices STOP command
4.9 Connection of the LSO and LSC LIMIT SWITCHES
4.10 Connection of the commands START
and PEDESTRIAN
4.11 Connection of LOCKING 12 Vac
4.12 Power supply of ACCESSORIES
4.13 Connection of the PHOTOCELLS A
4.14 Connection of the PHOTOCELLS A with TEST
4.15 Connection of the PHOTOCELLS B
4.16 Connection of the PHOTOCELLS B with TEST
4.17 Check of the connections
5 Functions and adjustments
5.1 Setting up with DIP B
5.2 Use of the DIP A
5.3 Advanced Settings
6 Using the remote controls
6.1 FULL CANCELLATION of the memory
6.2 ROLLING CODE activated
6.3 Learning of the remote controls
8 Reset of the memory
8 Time learning
8.1 Time learning: NORMAL WAY
8.2 Time learning: ADVANCED SYSTEM
8.3 Time learning PEDESTRIAN WAY
8.4 Time learning: pause (fastest way)
9 Instruction for TEST
10 Adjustment
11

Note

11 Declaration of CE conformity
-2-
Technical manual
Pag.
4
5
6
7
8
9
10
11
12
12
14
15
16
16
17
18
19
20
21
23