Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Clearance to combustible construction for built-in (combustible construction) grills:
A minimum of 12" (30.5 cm) must be maintained between the grill hood, sides and back and any combustible construction.
Product Dimensions
WARNING
Fire Hazard
Do not install this grill on or near
combustible materials.
Doing so can result in death or fire.
Built-in with
Insulation Jacket
Installation Dimensions
(combustible enclosure)
Enclosure and clearance dimensions
shown must be used. Given dimensions provide
required clearances.
The installation of this grill must conform with the
current standards CSA-Z21.58a-1998*, or with
local codes.
For installations in a
combustible enclosure,
the insulation jacket provided with the grill must
be used. A ledge on each side or a full deck
beneath the jacket must support the Insulation
Jacket.
Copies of the standards listed may
be obtained from:
* CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
4
39" (99.1 cm)
[27" (68.6 cm) grill with
12" (30.5 cm) side burner]
27" (68.6 cm), or
36" (91.4 cm)
*Not all models have side burner or side trays.
that are
counter and insulation jacket
support surfaces must be level
26" (66.0 cm)
25-1/2" (64.8 cm)
23" (58.4 cm)
side burner*
12" (30.5 cm)
minimum to
any accessory
2" (5.1 cm)
minimum to
11-5/8"
open hood
(29.5 cm)
1-1/8"
(2.9 cm)
11-1/8"
(86.4 cm)
(28.3 cm)
24-5/8"
(62.5 cm)
1/2"
3-5/8"
male NPT
(9.2 cm)
A
(61.0 cm)
5"
(12.7 cm)
gas line
locations
7-3/8"
(18.7 cm)
3"
(7.6 cm)
B
optional custom
access doors
19"
(48.3 cm)
Combustible enclosure installations
Grill size
A
27" (68.6 cm)
33" (83.8 cm)
36" (91.4 cm)
42" (106.7 cm)
39" (99.1 cm)
45" (114.3 cm)
34"
6" (15.2 cm)
min. clearance
for rotisserie
24"
support
surface
35-1/2"
(90.2 cm)
B
25-1/4" (64.1 cm)
34-1/4" (87.0 cm)
37-1/4" (94.6 cm)
Publicité
Table des Matières
