Installation Requirements; Location Requirements; Product Dimensions - KitchenAid 720-0856V LP Instructions D'installation Et Guide D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Location Requirements

Select a location that provides minimum exposure to wind
and traffic paths. The location should be away from strong
draft areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for grill:
 A minimum of 36" (92 cm) must be maintained between
the front of the grill hood, sides and back of the grill
and any combustible construction.
 A 36" (92 cm) minimum clearance must also be
maintained below the cooking surface, and the grill
shall not be used under overhead combustible
construction.
Rotisserie (accessory is not included)*
If you equip your grill with a rotisserie, a 6" (15.2 cm)
minimum clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See "Assistance" section to order.
22

INSTALLATION REQUIREMENTS

Product Dimension
The model/serial number rating plate is located on the inside of the
left cabinet door. See the following illustration.
A
A .Model/serial number plate

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

730-0856v ng

Table des Matières