Klein Tools VDV500-820E Manuel D'instructions page 7

BATTERY REPLACEMENT
When the Low Battery Indicator
1. Turn off instrument(s) before attempting to replace the batteries.
2. Loosen screw ,
T16 P16
3. Remove and properly dispose of four 1.5V AAA batteries.
4. Install new batteries (note the proper polarity).
5. Replace battery cover and fasten securely with the screw.
To avoid risk of electric shock, do not operate while battery door is removed.
PROBE-PRO TIP REPLACEMENT (KLEIN CAT. NO. VDV999-068)
The tip of the Probe-Pro is replaceable if damaged. To remove and replace tip:
P1
1. Turn tip 1/4 turn and pull gently to remove.
2. Insert new tip with key in the proper orientation and push gently.
3. Rotate 1/4 turn to lock into place.
Be sure instrument is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive
cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged period of time. Do not expose to high
temperatures or humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the
GENERAL SPECIFICATIONS section, allow the equipment to return to normal operating conditions before using.
Do not place the equipment and its accessories into a domestic rubbish bin. Items must be properly
disposed of in accordance with local regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
MAINTENANCE
or blinks, the batteries must be replaced.
P11 P8
on the battery cover
T15
www.kleintools.com/warranty
DISPOSAL/RECYCLING
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
, .
P15
CLEANING
STORAGE
WARRANTY
7