Klein Tools VDV500-820E Manuel D'instructions page 2

ENGLISH
The Klein Tools VDV500-063 Toner-Pro is a professional-series tone generator for wire identification, wire
tracing and wire pair identification. It features several tone frequencies and a strong power output for tracing
wires.
Operating Altitude: 6562' (2000 m) maximum
•
Relative Humidity: 10% to 90%, non-condensing
•
Operating Temp: 14° to 122°F (-10° to 50°C)
•
Storage Temp: -4° to 140°F (-20° to 60°C)
•
Dimensions: 2.5" x 5" x 1" (64 x 127 x 25 mm)
•
Weight: 7.4 oz (210 g) including batteries
•
Battery Type: 4 x 1.5V AAA Alkaline
•
Battery Life: Active: 120 hours
•
Standby/Storage: 3 years
Auto Power-Off: After 60 minutes of inactivity
•
Tones: Constant: 800 Hz, 1000 Hz, 1500 Hz
•
Alternating: 800/1000 Hz, 1000/1500 Hz
Tone Power: 8 dBm
•
Continuity Indication: Less than 10kΩ
•
Voltage Protection: Test Mode: 60 V
•
Specifications subject to change.
T1 TEST MODE Indicator
T2 'NRM' (Normal) Polarity Indicator
T3 'REV' (Reverse) Polarity Indicator
T4 'CONT' (Continuity) Indicator
T5 TONE MODE Indicator
T6 Tone Frequency Indicators
T7 Tone Mode Down selector button
T8 Tone Mode Up selector button
T15
2
GENERAL SPECIFICATIONS - VDV500-063 TONER-PRO
Tone Mode: 20 V through external 600 Ω
FEATURE DETAILS
T9 Power On/Off Button
T10 TEST/TONE Button
T11 Battery Status Indicator
T12 Lanyard Slot
T13 RJ11 Test Plug
T14 ABN (Angled Bed-of-Nails) Test Clips ABN (Angled Bed-of-Nails) Test Clips
T15 Battery Cover
T16 Battery Cover Screw (No. 2 Phillips) Battery Cover Screw (No. 2 Phillips)
T16
T12
T1
T2
T5
T7
T9
T11
T14
T13
T3
T4
T6
T8
T10