Operating Instructions - Leister UNIPLAN E Instructions D'utilisation

Operating Instructions

Read the operating instructions carefully before use and
keep for future reference.
Leister UNIPLAN E
Automatic hot air welding machine
Application
Overlap and tape welding of coated fabric covers, foils and sealing membranes made of PVC-P, PE, ECB, CSPE,
EPDM, PVDF etc. as well as PE coated tape fabric for lorries, tents, agricultural covers, building trade, bio-
topes, swimming pools, marquees, boat covers, inflatable boats, advertising hoardings etc.
Welding seam width 20 or 30 mm
The device should be used only in well-ventilated rooms. If necessary, work should be carried out with a fume hood
or personal protective equipment. Take care to ensure that no material burns during the welding process. Check
with the materials manufacturer regarding additives hazardous to health. The statutory regulations regarding health
protection of the respective country are to be applied.
Warning
Caution
230
120
FI
(Translation of the original operating instructions)
Danger! Unplug the tool before opening it, as live components and connections
are exposed.
Incorrect use of hot air tools can present a fire and explosion hazard, particularly
in the proximity of flammable materials and explosive gases.
Danger of getting burned! Do not touch the end of the heater tube and nozzle
when they are hot. Let the tool cool down. Do not point the hot air flow in the
direction of people or animals.
Connect tool to a receptacle with protective earth terminal. Any disconnection
of the protective conductor in or outside the tool is dangerous!
Only use extension lead with protective conductor.
The rated voltage stated on the tool must correspond with the mains voltage.
For personal protection, we strongly recommend the tool to be connected to an
RCCB (Residual Current Circuit Breaker) before using it on construction sites.
The tool must be operated under supervision.
Heat can ignite flammable materials which are not in view.
The machine may only be used by qualified specialists or under their supervisi-
on. Children are not authorized to use this machine.
Protect the tool from damp and wet.
GB
9