Top Panel - HEADRUSH LOOPERBOARD Guide D'utilisation Rapide

Features

Top Panel

1. Touchscreen: This full-color multi-touch display shows information relevant to the HeadRush
Looperboard's current operation. Touch the display (and use the hardware controls) to control the
interface. See Operation > Overview
2. Encoder: Turn this encoder to scroll through the available menu options or adjust the parameter
values of the selected field in the display. Push the encoder to confirm your selection.
3. Input Gain: Turn these knobs to adjust the independent gain level of each input.
4. Footswitches: Use these footswitches to perform different functions. The eight right-most
footswitches correspond to the four tracks of a loop. See the
use them.
5. Footswitch Indicators: These lights indicate the status of different functions (performed by the
footswitch below each one). See the
6. Main: Turn this knob to adjust the volume level of the outputs.
7. Phones: Turn this knob to adjust the volume level of the Phones output.
8. Aux: Turn this knob to adjust the volume level of the Aux input.
Important: The audio signal from the Aux input is routed directly to the outputs and cannot be
used for recording directly to a looper track. It is also unaffected by the Main volume or phones
volume knobs.
to learn how it works.
Operation chapter to learn about them.
Operation chapter to learn how to
3