HEADRUSH LOOPERBOARD Guide D'utilisation Rapide page 12

Importing Audio
In addition to creating loops using input sources, you can also import a .WAV or .MP3 audio file (such
as a recorded drum beat) directly into an empty looper track.
To import an audio file:
1. While viewing the Timeline page, tap the Import
Audio icon on any empty track.
2. Select a source by tapping one of the icons on
the left column of the browser:
• Factory: This is a collection of over 300
exclusive drum
provided by HeadRush.
• Internal: This is the internal storage of
HeadRush Looperboard.
• USB 1/USB 2/SD: These sources will appear
if you have external storage connected to the
respective ports on the rear panel of
HeadRush Looperboard.
3. Use the touchscreen to navigate through
folders, as necessary. You can search for an
audio file in a folder by tapping in the field in the
top center of the touchscreen, next to the
magnifying glass. Tap the X icon to clear your
search.
4. Select a file, and then tap the Play button if you
would like to preview the audio file or tap the
Import button to load the audio file into the
looper track.
5. After tapping the Import button, a dialog will
appear with up to 3 options:
• ADJUST BPM: This will change your loop's
tempo to match the auto detected tempo of
the imported audio file.
• MATCH BPM: This will change the imported
audio file to match the current tempo of your
loop.
• AS IS: This will import the audio file without
changing the tempo of the audio file, or the
tempo of your loop.
6. You may also need to indicate the number of
bars of your imported file. You can tap the Play
icon to preview the file at this point if needed for
reference.
12
and percussion loops