Installing The Unit - Kenwood DNX996XR Guide De Démarrage Rapide

Connection/Installation

Installing the unit

Ñ
Non-Japanese cars
Ñ
Japanese cars
6 or 7
Car Bracket
NOTE
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Ñ
Trim plate
1) Attach accessory 8 to the unit.
DNX996XR / DNR876S
28
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
6 or 7
8
DNX696S / DNX576S / DNR46EX /
DNR476S
8
A
B
● General Motors cars (DNX996XR)
1) Cut out accessory - to meet the shape of the
opening of the center console.
2) Attach accessory - to the unit.
Cut out to meet the shape
of the opening in the
vehicle.
● Toyota/Scion cars (DNX996XR)
1) Cut out accessory - as illustrated.
Cutting line
2) Fold double-sided adhesive (accessory =)
along the slit and attach it to accessory -
cut-out against the center rib as illustrated.
Use 2 pieces of accessory = for 1 accessory
- cut-out.
3) Attach accessory - cut-out to the unit.
=
A : Wide
B : Narrow
-
-