Usb/Sd/Ipod; Connecting A Usb Device; Inserting The Sd - Kenwood DNX996XR Guide De Démarrage Rapide

USB/SD/iPod

USB/SD/iPod

Connecting a USB device

1
Connect the USB device with the USB
cable. (P.33)
Ñ
Disconnect the USB device
1
Press the [HOME]/[ ] button.
2
Touch a source other than [USB].
3
Detach the USB device.
Ñ
Usable USB device
You can use a mass-storage-class USB device
with this unit.
The word "USB device" appearing in this manual
indicates a flash memory device.

Inserting the SD

DNX996XR
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
4
Press the [G] button.
DNR876S
1
Press and hold the [CAM] button.
18
2
Touch [OPEN] to the panel fully opens.
3
Insert the SD card into the slot until it
clicks.
4
Press and hold the [CAM] button.
DNX696S / DNX576S / DNR46EX /
DNR476S
1
Insert the microSD card into the slot until
it clicks.
Ñ
Remove the SD card
DNX996XR
1
Press the [G] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press the [G] button.
DNR876S
1
Press and hold the [CAM] button.
2
Touch [OPEN] to the panel fully opens.
3
Push the SD card until it clicks and then
remove your finger from the card. The
card pops up so that you can pull it out
with your fingers.
4
Press and hold the [CAM] button.
DNX696S / DNX576S / DNR46EX /
DNR476S
Push the microSD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with your
fingers.