Rexel Auto+ 750X Manuel D'utilisation page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
Control Panel and Indicators
Continuous
Auto
Jam Boost
U
C
Jam Free indicator – This alerts the user when too
much paper is fed into the manual feed slot (see section
on Jam Free Technology).
Paper Loading Door/Bin Door Open or Bin Full
indicator – This means either:
• Loading door is open
• Bin is open
• Bin is full
Lock indicator – This means the paper loading door is
locked (during shredding).
Oil level indicator
Auto+ 750X Shredding Capability
Auto+ 750X CAN shred
the following:
• Stapled paper
25mm within the corner
• 26/6 and 24/6 or smaller
staples
• Small sized paper loaded
centrally
• 750 sheets colour printing
Auto+ 750X CANNOT
shred the following:
• Heavy Duty Staples. Check the
staple leg length is not greater
than 6mm.
• Large clips. Check the length
of the paperclip is not longer
than 32mm.
• Plastic sheets, laminated
documents, plastic folders, glossy
paper or a sheet covered with
print on both sides.
Power On indicator – This means the machine is
Reverse
turned on.
Paper jam indicator – This means there is a paper jam
in the auto feed chamber.
If this symbol is flashing the shredder is attempting to
clear a paper jam automatically.
If this symbol is permanently illuminated red please
follow the instructions under 'Rare Occasion of
Jamming'.
Oiling in Operation indicator
Loading Door Locking Mechanism – PIN Password
1
2
Buttons – Enter a four digit code to lock the loading
3
4
door during shredding.
• Paper clip paper
• A3 folded in half
25mm within the corner
max. 2 sheets
• Capable of shredding small/
• 750 sheets single sided
medium (max wire thickness
printed paper
= 0.9 mm) paper clips
• 80 gsm paper
• 750 sheets plain paper
- A4 - 210mm x 297mm
- A5 - 148mm x 210mm
• >100gsm paper (through
- A3 single sheet folded in
manual feed slot ONLY)
• A document with more than
• Bound documents
25 sheets held together by a
staple or clip.
• Multiple folded sheets*
• Magazines or other documents
(e.g. A3 sheets folded in half).
bound by multiple staples
or clips
• Thick paper or card*
• Adhesive labels
* We recommend you feed these types of documents through the manual feed slot. However, the
Auto+ 750X can automatically shred folded and crumpled sheets if flattened out prior to loading.
Although the Auto+
750X will accept
fastened sheets,
Rexel recommend
that staples and paper
clips are removed and
folded paper un-folded
prior to shredding to
extend the life of the
product.
half to make A4
• Bulldog clips
• Unopened mail*
• Crumpled sheets*
G
5

Publicité

Table des Matières
loading

Table des Matières