Intended Use; Technical Description; Display And Control Elements - Dometic ENERGY & LIGHTING MPC01 Instructions De Montage Et De Service

Intended use

5 Intended use
MPC01 (ref. no. 9102500073) is a battery management system which allows the battery charge
status of several batteries to be monitored. MPC01 may only be operated with PerfectCharge
MCA chargers.
The device is designed for use in caravans and boats.
6

Technical description

6.1 Function
The current status information for each battery connected via a battery sensor appears on the
display: current, voltage, temperature, remaining charge time and remaining capacity (in %) of all
batteries connected.
Included with the MPC01 is one battery sensor for connecting one battery. To connect more
batteries you need additional battery sensors (ref. no. 9102500038) (accessories).
MPC01 enables the charge status of the starter battery and up to three supply batteries to be
monitored. To do so, the battery sensors are connected to the negative pole of the batteries. The
information read out from them is transmitted to the display via the CI bus interface. The battery
sensors measure the voltage, current and temperature of the connected battery. Along with the
battery sensor supplied, up to three more battery sensors (accessories) can be connected.
MPC01 features three programmable outputs for switching off consumers should the battery
capacity be too low (battery monitor function).
The battery charger is connected to the display via the CI bus interface.
MPC01 features a display mode, and a stand-by mode which is activated after a preset interval.
A programmable alarm function reminds the user of the preset time.
A jumper allows the operating mode to be changed from "caravan" to "boat".
6.2

Display and control elements

No. in
fig. 2,
Designation
page 3
1 Display
2 Selector button
10
Explanation
Shows values
Turn: Navigate through menus or change values
Press: Select menu items or values
MPC01
EN