Scope Of Delivery; Accessories; Intended Use - Dometic DSP-EM Instructions De Montage Et De Service

DSP-EM
3

Scope of delivery

Item in
fig. 1,
Quantity
page 3
1
2
3
4
4

Accessories

Available as accessories (not included in the scope of delivery):
Description
Battery sensor, MCA-HS1 Hella sensor
IBS multiplexer
5

Intended use

!
WARNING!
Also observe the instructions in the operating manuals of the connected devices.
DSP-EM is used for controlling, setting and the status display of devices that are connected to the
CI bus.
A connected MCA battery charger and the following inverters can be operated remotely with this:
• DSP1312T, DSP1812T, DSP2312T, DSP3512T, DSP1324T, DSP1824T, DSP2324T,
DSP3524T
The DSP-EM is the energy monitor for a connected battery sensor of the MCA-HS1 Hella sensor
type.
With an IBS multiplexer, up to four battery sensors can be connected. If no inverter is connected,
an IBS multiplexer is required for the energy supply.
EN
Description
1 Display
1 Connection cable
4 Fastening screws
1 Drill template
Scope of delivery
Ref. no.
9102500038
9600002566
9