Navigating Within The Menu - Dometic DSP-EM Instructions De Montage Et De Service

DSP-EM
9.4

Navigating within the menu

Navigate through the menus as follows:
➤ Turn the selector button (fig. 2 1, page 3), to scroll through the menu pages.
The selector button can be turned in both directions. When the last menu item has been
reached, the display goes back to the first menu item.
✓ The symbol of the selected menu (fig. 5 1, page 5) is displayed.
✓ The first value is displayed (chapter "Menus" on page 13).
Press the selector button to show the next value.
The following figure shows how you can navigate within the menu:
➤ Press the selector button to show the next value in the current menu (chapter "Menus" on
page 13).
Switching inverter on/off
➤ Press
➤ Press
Switching on the display
The display switches off after a defined time.
➤ Press the selector button or
EN
to switch off the inverter.
again to switch on the inverter.
or , to illuminate the display.
Using DSP-EM
Battery menu
Load menu
Alternating voltage
15