Mechanism Deck Assembly - Sony CDX-540RF Manuel De Service

Note: Follow the assembly procedure in the numerical order given.
OPTICAL PICK-UP COMPLETE ASSY
shaft (A)
GEAR (LOMINI)/(LOAD CAM) ASSY
gear (LOAD 2)
marking
Fig. A
3 Attach the gear (LOAD CAM) assy
with its facing inside.
16
SECTION 4

MECHANISM DECK ASSEMBLY

1 Move the lever (LOCK 3A) in the direction of arrow A ,
and return it a little in the direction of arrow B
from the position where the chuck plate is moved
chuck plate
down to the lower limit.
B
gear (LOMINI)
chuck plate
slit
A
3 stop ring 2.0 (E type)
4 tension spring (DH)
2 optical pick-up complete assy
Note: Insert the shaft (A) first.
2 Attach the gear (LOMINI) at the position
shown in Fig. A.
shaft (rotary prevention C)
1 Move the lever (LOCK 3A)
B
fully in the direction of arrow B
to move the chuck plate up.
4 stop ring 1.5 (E type)