Perimeter Beam & Cable Assembly
Option A: Wall Configuration
12A
Attach cable eyelet to side beam (#3/#4) using 5/16" bolt (#19) , nut (#20) and fender washer (#23)
Wall Mounted Cable
Assembly:
Insert a 5/16" Hex Bolt into
the 57th hole of the side
perimeter beam.
Insert a 5/16" Hex Bolt (#19) into the Front/First hole of the side perimeter beams. Slide Pully
13A
cable cap (#15) onto the Hex Bolt and wrap the Cable Assembly around the pulley (#16). Slide
the Pulley Cable Cap onto the Hex Bolt and secure with a 5/16" lock nut (#20). Align tab on Pulley
Cable Cap with cutout in side frame.
Note:
To continue Wall Installation skip to page 19.
16