NewAge Products Pro Serie Mode D'emploi page 18

Perimeter Beam & Cable Assembly
Option B: Ceiling Configuration
12B
Attach cable eyelet to side beam (#3/#4) using 5/16" bolt (#19), nut (#20) and fender washer (#23)
Ceiling Mounted Cable
Assembly:
Attach the Cable Eyelet
(#21) to the respective hole
according to the distance
measured from the ceiling
to the bottom of the Wall
Mounted Shelf.
Example shown 18" from
ceiling = 18th hole.
Insert a 5/16" Hex Bolt (#19) into the Front/First hole of the side perimeter beams. Slide Pully
13B
cable cap (#15) onto the Hex Bolt and wrap the Cable Assembly around the pulley (#16). Slide
the Pulley Cable Cap onto the Hex Bolt and secure with a 5/16" lock nut (#20). Align tab on Pulley
Cable Cap with cutout in side frame.
Note:
To continue Ceiling installation continue to page 19.
18