NewAge Products Pro Serie Mode D'emploi page 11

Plan the Installation Location
Option A: Installing Wall Mounted Shelf To the Wall
Once it is determined that your Wall Mounted Shelf will be installed to the wall, verify
1A
there is sufficient clearance. Mark the desired position of the bottom of the Wall Mounted
Shelf with a horizontal level line across the wall.
Note:
Wall mounted configurations require
greater than 35" between the ceiling and
the bottom of the Wall Mounted Shelf.
Minimum
Height: 18"
2A
Using a stud finder, locate and mark the center position of the studs on the wall. Check
the spacing of your wall studs and ensure they fit the size of your install.
Maximum
Height: 57"
Level Line
Minimum
Height: 18"
Maximum
Height: 57"
Level Line
Note:
Skip to page 13 to continue wall Installation.
96"
48"
4x8ft Wall Mounted Shelf
96"
48"
Ceiling Mounted:
18-32"
Side View
Wall Mounted:
26"
Wall Mounted:
35"
Note:
If the spacing of your
studs do not align with
the install locations,
please refer to installing
a Wall Brace on page 26
Note:
Wall Mounting Brackets
should be placed 48in
apart center to center.
11