Frame Assembly - NewAge Products PRO 3.0 Serie Manuel D'installation

Frame Assembly

Attach horizontal beam to leg
1
assembly using M8 x 16mm bolts
and M8 lock washers.
Pre-drill holes using a 3/32"
3
drill bit and secure frame to
worktop using M4 x 16mm screws
provided.
Insert leg posts at desired height and
5
secure using M8 x 60mm bolts, nuts,
and washers provided.
Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions.
Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.com
Center the frame on the bottom side
2
of worktop based on the images
below.
66" (1676mm) Workbench
2" (50.8mm)
1"
(25.4mm)
End
Front
Attach the underside bracket to the horizontal
4
beam using the M5 x 10mm Phillips head bolts.
Pre-drill holes and secure underside support to
worktop using three M4 x 16mm screws.
Note: Align brackets based on cabinets to be
stored under the workbench
6
Stand and level workbench
84" (2133mm) Workbench
0" (0mm)
1"
(25.4mm)
End
Front