Unpacking; Tools Needed; Spare Parts - NewAge Products PRO 3.0 Serie Manuel D'installation

Masquer les pouces Voir aussi pour PRO 3.0 Serie:
Table des Matières

Publicité

Unpacking

• Begin by placing the package on a covered flat surface.
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See "Parts" and "Tools Needed" in the list
below.

Tools Needed

1 x Adjustable wrench
1 x 7/16" Socket driver
1 x 8mm" Socket driver
wrench
1 x #2 Phillips
head screw driver

Spare Parts

Hex Head Tapping Screw
M6x75mm
lock nut
0.25 Inch
1 x 12" Magnetic Leveler
1 x 7/16" socket
wrench
1 x Cordless Power Drill
1 x #3 Phillips
head screw driver
Flat Washer
Wood screw
M6
Hex Bolt
0.25-20x0.625in
Wall Hanging Bracket
1 x Stud Finder
3
2
1
1
2
1 x Set
Square
SKU 41483
Spare Part Hardware Box Includes:
M6x75mm Hex Head Tapping screw
M6 Flat Washer
#8 x 5/8in (Wood Screw)
0.25in Lock Nut
(#8 x 5/8")
0.25-20 x 0.625in Hex Bolt
Wall Hanging Bracket
To request the Spare Part Hardware Box , please
get in contact with our NewAge Products customer
service team at 1.877.306.8930
1 x Tape Measure
3
1 x Pencil
1 x #2 Phillips Bit
1 x Hammer Drill 1 x Masonry Bit
[optional for masonry]
5

Publicité

Chapitres

Table des Matières
loading

Table des Matières