Unpacking; Product Inspection - NewAge Products 40sqft PVC slatwall - Silver Guide D'installation

Unpacking

• Begin by placing the package on a covered flat surface.
• Remove all cardboard, foam packaging material and nylon bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the required tools. See "Tools Needed" in the list below.

Product Inspection

IMPORTANT: The illustrations shown in this Install Guide are for representation purpose only. Actual sizes
of the parts supplied in the package can be slightly different by appearance. Appearance of hardware sizes
are enlarged for ease of understanding for the customer.
NOTE: The PVC Slatwall panels are ideal for 16 inches on-centre stud spacing.
If you have 24 inches on-centre studs, you would be required to start by trimming the panels to centre the
full install.
NOTE: The 40 sqft PVC Slatwall kits are optimised for 20 ft wide wall installs.
4
• Check to see all parts are received as per the
order placed.
• Contact NewAge Products at 1-877-306-8930;
for any missing parts.
• Inspect the products for any damages before
starting the installation.
• Go through the installation instructions carefully
before starting the installation.