Unpacking; Tools Needed - NewAge Products Pro 3.0 Serie Guide D'installation

Unpacking

• Begin by placing the package on a covered flat surface
• Remove all cardboard, foam packaging material and clear plastic bags.
• Dispose / recycle all packaging materials.
• Verify all the contents in the box and gather the rquired tools. See "Tools Required" , and
"Parts Supplied" lists.

Tools Needed

1 x Adjustable wrench
1 x 7/16" Socket driver 1 x 8mm" Socket driver
wrench
1 x #2 Phillips
head screw driver
4
1 x 12" Magnetic Leveler
1 x 7/16" socket
wrench
1 x Cordless Power Drill
1 x #3 Phillips
head screw driver
1 x Stud Finder
3
2
1
1 2 3
1 x Set 1 x Pencil
Square
1 x Hammer Drill 1 x Masonry Bit
[optional for masonry]
1 x Tape Measure
1 x #2 Phillips Bit