Safety Instruction; Electrical Connection - IKEA TILLREDA Mode D'emploi

Masquer les pouces Voir aussi pour TILLREDA:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH

Safety Instruction

Installation
Manufacturer is not responsible for any
injury to persons and pets or damage
to property caused by failure to comply
following requirements.
Caution! To proceed with the installation
refer to the Safety Information.
Warning! Installation process must
follow the laws, ordinances, directives
and standards (electrical safety rules
and regulations, proper recycling in
accordance with the regulations, etc.) in
force in the country of use!
Warning! Risk of injury from electrical
current.
a) The electrical mains terminal is live.
b) Make electrical mains terminal free of
voltage.
c) Loose and inappropriate plug and
socket connections can make the
terminal overheat.
d) Have the clamping connections
correctly installed.
Warning! Keep the distance of 10 cm
clear around the appliance.
Avoid installing the appliance next
to doors and under windows as hot
cookware may be knocked off the hob
when doors and windows are opened.
Place the machine on flat and solid
surface ONLY.
Do not place the machine on carpet,
cloth or paper material when the
machine is in working condition.
Do not use the appliance near water, fire
or damp areas.
This appliance is only for indoor use, not
design for outdoor or use under rain.
Make sure that the appliance is not
damaged because of transport. Do not
connect a damaged appliance.
Do not install the appliance if it is
damaged during the transportation.
Do not connect the hob with extension
cords and do not place the hob with cord
across working areas.
Use the main power supply socket only.
Do not change the specifications or
modify this product. Risk of injury and
damage to the appliance.
Warning! Carefully obey the instructions
for electrical connections.

Electrical connection

Before connecting, check that the
nominal voltage of the appliance stated
on the rating plate, corresponds to the
available supply voltage. Also, check the
power rating of the appliance and ensure
that the wire is suitably sized to suit
the appliance power rating (refer to the
Technical data chapter).
The rating plate is located on the lower
casing of the hob.
Before Use:
Please pay attention to the following
instructions before use.
Please use the standard main power
supply socket, and regularly check with
the socket to prevent any damage.
Please check with the power cord
and plug. If the power cord or plug
is damaged, please do not use the
machine. Do not pull out the plug with
wet hand.
If the machine is not in use for a long
period of time, please turn on the
machine to stabilize the electronic
component for 10 minutes first. Then,
you can start to operate the machine.
Remove all packaging, stickers and film
from the appliance before the first use.
Warning! Fire hazard! Overheated fats
and oils can ignite very quickly.
Warning! Users with implanted
pacemakers should keep their upper
body at least 30 cm from induction
cooking zones that are switched on.
Warning! Do not operate the appliance
with wet hands and keep control panel
surface dry. Lot of water on control panel
keys will make them no longer operable.
During & After Use:
Please pay attention to the following
instruction to prevent ignition and accidents.
Do not place any following objects on the
panel when the machine is in working
condition.
8

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Tellreda

Table des Matières