After-Sales Service - Siemens GTM Serie Manuel D'utilisation

en
Problem
Increased formation
of frost on the upper
edge of the
appliance.

After-sales service

You can find an after-sales service point
near to you in the telephone directory or
in the list of after-sales service points.
When you call the after-sales service,
quote your product number (E no.) and
the production number (FD no.) of your
appliance.
You will find this information on the
rating plate. Figure +
Please help us to avoid unnecessary
journeys by quoting the appliance and
production number. This will save you
the additional associated costs.
34
Possible cause
The condensation
water plugs are not in
the correct position.
The transport locks
were not removed
The chest lid is being
opened frequently.
Remedy
Insert the condensation water plugs
correctly on the floor of the
appliance and on the front of the
appliance.
Remove all four transport locks,
figure # (see section "Installing the
appliance").
Do not open the lid unnecessarily.
Repair order and consultation
if faults occur
The attached after-sales service
directory contains the contact data for all
countries.
GB 0344 892 8999 Calls charged at
IE 01450 2655
US 866 447 4363
local or mobile
rate.
0.03 € per minute
at peak.
Off peak 0.0088 €
per minute.
toll-free