Installing The Anti-Vibration Pads; Choosing The Best Location - Sony SA-VA10 Mode D'emploi

Using the remote
You can use the shaded buttons shown below to
operate Sony TVs.
To
turn on a Sony TV
operate a Sony TV
turn off a Sony TV
Installing the Anti-vibration
pads
1
Spread a towel, or other soft cloth, over a table
and lay the speakers down.
2
Peel off the covering sheet from the anti-vibration
pad and attach it on the bottom of the speakers (4
for each speaker).
3
Make sure the anti-vibration pads are securely
attached and stand the speaker upright.
+
–
Press
TV POWER
the button(s) for the operation
you desire.
TV POWER

Choosing the Best Location

To obtain high sound quality and a proper sound
image from the front speakers, place the speaker with
the built–in operation panel to the left of your TV and
the other to the right of your TV so that the centre
channel tweeters angle towards the centre of the room.
For the best central sound image, place the left and
right speakers within 1.5 m of each other and
equidistant from the TV.
The left and right speakers must be placed standing
upright, laying them on their sides will defeat the
centre channel surround effect.
1.5 m (5 feet) max
Place the rear speakers so that they fire directly across
at each other about 60 – 90 cm (2 – 3 feet) above your
listening position.
60 – 90 cm
(2 – 3 feet)
Getting Started
GB
7