Teac AG-10D Manuel Du Propriétaire page 60

60
All manuals and user guides at all-guides.com
STEREO
Surround Mode 2
C
When the source is PCM (2-channel stereo) and IN-AUTO or
IN-PCM is selected, or when analog stereo signals are input,
you can select one of the following surround modes:
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC, DOLBY VIRTUAL, DTS NEO:6 CINEMA,
DTS NEO:6 MUSIC, THEATER, HALL, MATRIX
< When the DSP button is pressed once, the current surround
mode is displayed. Press the DSP button repeatedly to select
any other surround mode.
< When you press the DSP button, the sound is cut off for a
moment.
< When the surround back speaker is set to "None", you cannot
select DOLBY DIGITAL EX.
< DOLBY DIGITAL or DOLBY DIGITAL EX can be selected only
during playback of a DVD disc recorded in DOLBY DIGITAL
format.
< The DSP indicator lights when THEATER, HALL, MATRIX or
DOLBY VIRTUAL is selected.
(DSP: Digital Signal Processor)
Press the STEREO button to select the stereo mode. "STEREO"
is scrolled, and sound is output from front speakers (and the
sub-woofer if connected).
To cancel the stereo mode, select any other surround mode by
pressing the DSP button.
< If you select the stereo mode while the digital signal of DOLBY
DIGITAL or DTS are being input, the multi-channel sound is
downmixed to 2-channel.
< If the SPEAKER button is set to off while the digital signal of
DOLBY DIGITAL or DTS are being input, the multi-channel
sound is downmixed to 2-channel automatically. And when the
SPEAKER button is set to on, it will return to the previous
surround mode.
ENGLISH