Teac AG-10D Manuel Du Propriétaire page 21

A STANDBY/ON
When the POWER switch of the main unit is depressed, use
this button to turn the unit on or standby.
B POWER
Press this switch to turn the unit standby or off.
The equipment draws nominal non-operating power from
the AC outlet with its POWER switch in the OFF position.
C FUNCTION
Use this knob (or buttons of the remote control unit) to select a
source.
D 7CH DIRECT
Use this button to select the source connected to the 7CH
DIRECT INPUTS.
E Standby indicator
This indicator lights when the unit is in the standby mode.
When the unit is turned on, it goes off.
F Speaker indicator
This indicator lights when the SPEAKER button is set to on.
G DIGITAL INPUTS
Use this button to select one of the digital input terminals.
H DYNAMIC RANGE
Use this button to compress the dynamic range during
playback of a disc recorded in Dolby Digital.
I CINEMA EQ
Use this button to turn on or off the cinema equalizer.
J Display
When the unit is on, the current status of the unit is displayed.
K Remote Sensor
When operating the remote control unit, point it towards the
remote sensor.
L Buttons for RDS function (European models only)
In FM tuner mode, use these buttons for RDS function.
RDS is available in European countries only.
M MASTER VOLUME
Turn this knob (or press the VOLUME buttons of the remote
control unit) to adjust the master volume.
VIDEO 3 INPUT jacks
N
You can connect a component such as a portable CD, game
player, etc. to these jacks.
When using these jacks, remove the cap. When you don't use
them, leave the cap in place.
O BAND
Use this button to select FM or AM.
All manuals and user guides at all-guides.com
ENGLISH
P TUNING/PRESET
In the manual tuning mode, use these buttons to tune in a
station.
In the preset tuning mode, use these buttons to select a preset
channel.
Q FM MODE
In FM tuner mode, use this button to select stereo or monaural.
R MEMORY
Use this button to store preset channels into memory.
S TUNING MODE
Use this button to select the manual tuning mode or the preset
tuning mode.
T PRO LOGIC II MUSIC PARAMETER
Use this button to change parameters of DOLBY PRO LOGIC II
MUSIC.
U STEREO
Use this button to select stereo mode. Sound is output only
from the front speakers (and the sub-woofer).
V Power indicator
This indicator lights when the unit is on.
W DSP
Use these buttons to select a surround mode.
X AUTO
Use this button to change the decoding mode of digital signals.
Y SPEAKER SETUP
Use this button to start speaker configuration.
Z SELECT/LEVEL
Use these buttons to adjust the level of each speaker, etc.
a
TONE MODE
Use this button to select a tone mode.
b CHANNEL SELECTOR
Select a speaker by pressing this button repeatedly, and adjust
the level using the LEVEL buttons.
c
SPEAKER
Use this button to turn on or off the speakers.
on : Sound is output from the speakers.
off : No sound is output from the speakers.
d PHONES
For private listening, insert the headphones plug into this jack,
and adjust the volume by turning the MASTER VOLUME knob.
21