General; Scope; Optional Accessories; Ordering Information - ESAB PT-32EH Manuel D'instruction

sEctIoN 2
WarNINg

2.1 gENEral

The patent pending PT-32EH is a manual torch with a 90° head designed for use with several Plasma Arc Cutting Packages using clean, dry
air as the plasma gas. The service line lengths available with the PT-32EH torch are 25 feet (7.6 m) and 50 feet (15.2 m). The PT-32EH torch
is rated to operate at a maximum of 90 amperes at 100% duty cycle.

2.2 scopE

This manual is intended to provide the operator with all the information required to assemble, operate, and repair the PT-32EH Plasma
Arc Cutting Torch. For additional safety precautions, process instructions, and system troubleshooting; refer to the appropriate instruction
manual for your Plasma Arc Cutting Package.
PT-32EH Torch
Designed for superior cutting performance and ease of han-
dling, the PT-32EH produces clean, exceptionally high quality
cuts.
• Most compact 90 amp torch on the market
• Excellent cutting capacity - cuts up to 1-1/2 in. (38 mm)
• Uses shop air, cylinder air or nitrogen for superior versatil-
ity
• Pilot arc starting - even starts through paint
• Choice of 25 ft (7.6 m) or 50ft. (15.2 m) line length
• Excellent consumable life
• Parts in place design
• Patented torch and safety circuit
• Exclusive 40 amp Drag Nozzle
• One-year warranty
Compatible ESAB Consoles
powercut-875, powercut-1125, powercut-1250, powercut-
1500

Optional Accessories:

50/70 amp spare parts Kit (pc-875 "cE") ............................. 0558004949
70 amp spare parts Kit (pc-1250 "cE") ................................... 0558003560
90 amp spare parts Kit (pc-1500 "cE") ................................. 0558003557
plasma flow Measuring Kit:
This valuable troubleshooting tool allows measurement of
the actual plasma gas flow through the torch .................... 0558000739
torch guide Kit:
This complete kit, in a rugged plastic carrying case, includes
attachments for circle and straight line cutting on ferrous and
non-ferrous metals.
Deluxe, 1-3/4" - 42" (44.5 mm - 106 cm) Radius, ................ 0558003258
Basic, 1-3/4" - 28" (44.5 mm - 71 cm) Radius ....................... 0558002675
stand-off guide
For proper stand-off distance when drag cutting ............. 0558002393
40 amp Drag Nozzle ....................................................................... 0558002908
gouging Nozzle ............................................................................... 0558003089
heat shield gouging ..................................................................... 0558003090
heat shield long ("cE") ................................................................ 0558003110
the plasma arc cutting process employs high voltages. contact with "live" parts of
the torch and machine must be avoided. also, the improper use of any of the gases
employed can present a safety hazard. Before beginning operation with the pt-32Eh
torch, refer to the safety precautions and operating instructions in the appropriate
power source instruction manual.
using the torch on any unit not equipped with a mating safety interlock circuit may
expose operator to unexpected high voltage.
Specifications
Cuts up to 1-1/2 in. (38 mm)
Current Capacity ................................................... 90 amps @ 100% duty cycle
Air Supply ............................350 cfh @ 75-80 psig (165 l/min @ 5.2 - 5.5bar)
Length of Service Lines ...........................................25 (7.6m) or 50 ft. (15.2m)
Dimensions
Overall Length .......................................................................8.2 in. (208 mm)
Length of Head ....................................................................... 3.0 in. (76 mm)

Ordering Information

PT-32EH, 90°, 25 ft. (7.6 m) line .................................................... 0558003548
PT-32EH, 90°, 50 ft. (15.2 m) line .................................................. 0558003549
Torches and torch body assemblies are supplied without electrode,
nozzle, heat shield and valve pin. Order complete spare parts kits or
individual components shown with PT-32EH parts breakdown on next
page.
Drag heat shield (standard)
Maintains a constant stand-off, Good life in most applications ............
.............................................................................................................. 0558003374
Drag heat shield (heavy Duty)
Maintains a constant stand-off, Long life, Suitable for piercing ............
.............................................................................................................. 0558004206
71

DEscrIptIoN