Dualit ESPRESSIVO Mode D'emploi page 23

DCM1 instruction manual_figs out.qxp
For a cappuccino
keep the holes on
the top of the nozzle
level with the rising
froth so that you are
just frothing the top
of the milk.
For a latté you can
froth deeper into the
jug and for a little
longer so that the
milk is all frothed to
a smooth velvety
texture.
All manuals and user guides at all-guides.com
18/04/2008 14:30 Page 23
ADDING WATER OR MILK
FROTHING FOR A CAPPUCCINO OR LATTÉ
12. Don't let the end of the froth nozzle touch the
13. Once you have the desired amount of froth, turn the
14. Let the frothed milk stand for approximetly 15–20
Barista tip: Know when to turn off the steam by listening
to the sound of the frothing; when it is ready the sound of
the frothing will become quieter. The milk is ready as soon
as a soft, thick layer of froth has formed.
23
bottom of the jug as this could restrict the flow of
steam.
control knob to the off position. Don't remove the jug
until the steam wand has stopped producing steam.
N.B. When you have switched the control knob back
to the off positon, steam will vent from the drip tray.
This is not a cause for concern. Water is being purged
through the machine to reduce the temperature ready
for the next coffee.
seconds prior to serving. This seperates the froth and
steamed milk. Then gently pour the hot milk into the
cup and spoon the froth on top of the milk.
GB