AEG MRC 4119 P Mode D'emploi page 69

Inserting the Battery (Backup)
(Battery is not included with the device)
In case of a power cut or if the device is unplugged, with backup battery inserted,
the settings will be kept.
1. Open the battery compartment at the bottom. Remove for this the screw of
the battery compartment lid with a Phillips screwdriver.
2. Insert one battery of the type CR2032, 3 V. Mind the correct polarity (indicated
on the bottom of the battery case)!
3. Close the battery case. Secure the battery compartment lid again with the
screw.
4. If the device is not used for an extended period of time, remove the Battery
from the device to avoid any leaking of battery acid.
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the
used batteries at the relevant collection bin or at your dealer's.
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw
batteries into the fire. There is a danger of explosion!
Power supply
• Insert the grid plug into a properly installed three prong socket with 230 V,
50 Hz.
• Make sure the grid voltage corresponds to the figures on the rating plate.
• If you have not inserted a backup battery, the stored clock time will be lost as
soon as the power supply is interrupted.
Switching the Unit On/Off
Press the button (8) to switch the unit on or off.
Radio station tuning
1. Use the BAND button (14) to select FM or AM, depending on the frequency
band you want to listen to.
VHF = FM, medium wave = AM
English
67