Ego Power+ ST1510T Manuel De L'opérateur page 20

STARTING/STOPPING THE
STRING TRIMMER
To Start
1. Move the lock-off trigger forward
and then press the switch trigger.
The string trimmer will start.
2. The rotational speed of the trimmer
head is controlled with the switch
trigger. More pressure on the trigger
results in higher speed; less pressure on the trigger results in lower speed. Adjust
the speed to suit the task at hand (Fig. 14).
NOTICE: The motor runs only when the lock-off trigger is moved forward and switch
trigger is both pressed at the same time.
Speed-Adjustment Function
(Fig.15)
The string trimmer has two speed setting.
Move the high/low speed trigger forward or
backward to choose the low or high speed.
To Stop the string trimmer
Move the string trimmer away from the
cutting area and release the switch trigger
to stop the tool.
WARNING:
breaks and after finishing work.
20
56-VOLT LITHIUM-ION CORDLESS BRUSHLESS STRING TRIMMER — ST1510/ST1510-FC
Always remove the battery pack from the string trimmer during work
14
15
High/low-Speed Switch
Switch Trigger
Lock-off Trigger