Preparing The Machine For Use - Clarke EX20 Mode D'emploi

Masquer les pouces Voir aussi pour EX20:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REVISED DATE

PREPARING THE MACHINE FOR USE

1
Inspect the machine, hoses, and cleaning tools for cleanliness and completeness.
2
Screw the Recovery Tank Lid (1) closed. Ensure the Recovery Tank Drain Hose Cap (4) is closed tightly.
3
Pre-spray spots and heavy traffi c areas before extracting with the detergent of your choice. Mix the pre-spray according to the detergent
manufacturer's directions.
4
Open Solution Tank Fill Opening (9) and fi ll the solution tank with clear water (12.5 gal. / 47 L capacity). If desired, add a detergent or rinse
of your choice (we recommend a CRI approved detergent). If you choose to add a detergent to the solution tank, be sure to mix well, and
always follow the use & dilution instructions on the detergent label. Only use a detergent with a pH between 5 and 10. Although this machine
is designed to supply instant hot water (heated models only), the addition of warm water to the solution tank would increase heater effi ciency.
Never use water above 130º F/54º C in the solution tank.
CAUTION!
Use low-sudsing, liquid detergents designed for carpet extraction.
4/2015
INSTRUCTIONS FOR USE
56091193 - EX20
ENGLISH
A - 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

561052885610528956105290

Table des Matières