Hamilton Beach 62670 Mode D'emploi page 6

840132900 ENv01 2/14/05
To Insert Attachments
Flat Beaters and Whisk
1. Make sure mixer is unplugged and
speed control is set to OFF.
2. Insert a beater or attachment into an
• Make sure that mixer is off and unplugged before installing or removing
attachments.
• Do not reach or insert utensils into bowl while mixer is running.
Failure to follow these instructions can result in broken bones, cuts or
other serious injury.
6
4:15 PM Page 6
Twisted Wire Beaters
1. Make sure mixer is unplugged and
opening on the
bottom of the
mixer. Push
until it clicks
into place.
Repeat with
other beater or
2. Insert wire beater with collar into
attachment.
opening indicated by the illustration
on the bottom of mixer
until it clicks into place. Repeat with
other beater or dough hook.
wWARNING
Pinch and Crush Hazard
speed control
is set to OFF.
Collar
. Push