System Startup; System Software - Clevo NL50GU Guide Utilisateur

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the computer (e.g. keyboard and mouse) to their ports.
4. When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the battery will be
locked to not power the system until first connected to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack on the right of the computer, then plug the AC power cord into an outlet, and connect
the AC power cord to the AC/DC adapter. The battery will now be unlocked.
5. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 180 degrees); use the other hand (as illustrated in
1) to support the base of the computer (Note: Never lift the computer by the lid/LCD).
6. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-
configuring your computer for a different system, you will find this manual refers to Microsoft Windows 10.
4
Model A
180 ﾟ
Opening the Lid/
LCD/Computer
with AC/DC Adapt-
er Plugged-In
Model B
Note that you should always shut
your computer down by choosing the
Shut down command in Windows
(see below). This will help prevent
hard disk or system problems.
1. Click the Start
Figure 1
Menu icon
2. Click the Power
item
3. Choose Shut
down from the
menu.
Figure
Shut Down
.
.