Bosch Rexroth SD301 Mode D'emploi page 40

40/144 Bosch Rexroth AG
5 Menus when connecting the SD301 to a SE31x/SEH312
5.2.2 Unit display
Units for torque and gradient are used as
shown in Table 1:
Torque
Nm
Ftlb
Inlb
Kpm
Kgm
Kgfm
Table 1:
For additional values, units are used as
shown in Table 2:
Value
Angle
Yield point drop
Time
Speed
Table 2:
Gradient
Nm/°
Ftlb/°
Inlb/°
Kpm/°
Kgm/°
Kgfm/°
Unit
°
%
s or ms
rpm or %
SD301 | 3 609 929 826/06.03
5.2.3 Entry limits
The entered parameters are checked for their
value range using set limits. If the value range
is violated, an error message is generated
and the data are not transferred (see Fig. 25
for an example):
Fig. 25:
A plausibility check including checking
against the spindle limits is not performed.