Safety Instructions; Intended Use; Safety Notes - Bosch Rexroth SD301 Mode D'emploi

3 609 929 826/06.03 | SD301

1 Safety instructions

1 Safety instructions
1.1

Intended use

The SD301 system display is designed to be
connected to System 300 tightening control-
lers and communication units.
Additional information can be found in the
system documentation on the BS300 CD.
1.2

Safety Notes

The data specified above only serve to de-
scribe the product. No statements concern-
ing a certain condition or suitability for a
certain application can be derived from our
information. The information given does not
release the user from the obligation of own
judgment and verification. It must be remem-
bered that our products are subject to a nat-
ural process of wear and aging.
Keep this technical information in a place
easily accessible for all users.
The technical information is intended for spe-
cially trained personnel who have a special-
ized knowledge of the machine's hardware
components.
Repairs or other operations on the
hardware or software of our prod-
ucts, which are not described in
these instructions, may only be
carried out by Rexroth experts.
Unqualified repairs or operations on the hard-
ware or software or the failure to observe the
warnings in these instructions or warnings
placed on the product itself could lead to per-
sonal injury or damage to equipment.
Bosch Rexroth AG 27/144
Qualified personnel are:
– Project personnel, familiar with the safety
regulations of automation systems and
electrical engineering.
– Operators, instructed in the use of the
equipment and having knowledge of the
relevant operational parts of this docu-
mentation.
– Commissioning personnel, authorized
to set electric circuits and machines/sys-
tems into operation, ground and mark
them, according to the accepted rules of
safety and current technology.
Repairs and replacement of parts carried out
by the user are his own responsibility. After
repairing or replacing parts, all prescribed
functional and safety checks must be carried
out.