Fein Slugger JME Holemaker III Mode D'emploi page 6

OBJ_BUCH-0000000281-002.book Page 6 Tuesday, April 24, 2018 9:09 AM
en
6
– Arsenic, chromium and other wood pre-
servatives;
– Materials for pesticide treatment on boat
and ship hulls;
– Stainless steel dust, metal dust and non-
ferrous metal dust;
To minimize the unwanted intake of these
materials:
– Use dust extraction matched appropriately
for the developing dust.
– Use personal protective equipment, such
as a P2 filter-class dust protection mask.
– Provide for good ventilation of the work-
place.
The risk from inhaling dusts depends on how
often these materials are worked. Materials
containing asbestos may only be worked on
by specialists.
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level measured at the
L
workplace (re 20 μPa), in decibels
pA
K
Measuring uncertainty
Measured A-weighted sound power level
in decibels
K
Measuring uncertainty
C-weighted peak sound pressure level measured at the
L
workplace , in decibels
pCpeak
K
Measuring uncertainty
Mean vibrational value (core drilling)
2
– m/s
2
– ft/s
K
Measuring uncertainty
2
– m/s
2
– ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy rep-
resents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Hot mixtures of sanding dust and paint/var-
nish residuals or other chemical materials in
the filter bag or the vac filter can self-ignite
under unfavourable conditions, such as spark-
ing from sanding metal, continuous sunlight
or high ambient temperatures. To prevent
this:
– Avoid overheating the material being
– Empty the dust collector/container rou-
– Observe the material manufacturer's
– Observe the relevant regulations for the
, in decibels
pA
L
(re 1 pW),
wA
, in decibels
wA
, in decibels
pCpeak
, in
Wood and light-metal dust can
CAUTION
cause spontaneous combus-
tion or explosions.
sanded and the power tool.
tinely.
working instructions.
materials being worked.
JME Holemaker III (**)
91.6
3
102.6
3
106.1
3
< 2.5
8.3
1.5
4.9