Fein Slugger JME Holemaker III Mode D'emploi page 17

OBJ_BUCH-0000000281-002.book Page 17 Tuesday, April 24, 2018 9:09 AM
Working instructions.
When there is danger of falling down, secure the machine using the provided
WARNING
safety strap; especially when working aloft, on vertical building elements or
overhead. In case of a power failure or when the mains plug is pulled, the magnetic holding
power is not maintained.
Always carry the power tool by its han-
dle, not by the drill-motor cable.
Fastening the safety strap (figure 8).
Always fasten the machine securely around
the workpiece using the provided safety
strap.
Fig. 7
Fig. 8
Clamping strap
en
17