Erasing A Track Mark - Sony Walkman MZ-R70 Mode D'emploi

Erasing a track mark

When you record with analog (line) input, unnecessary track marks
may be recorded where recording level is low. You can erase a track
mark to combine the tracks before and after the track mark. The track
numbers will change as follows.
T MARK
1
While playing the track with the track mark you want to erase,
press X to pause.
2
Find the track mark by pressing . slightly.
For example, to erase the third track mark, find the beginning of
the third track. "00:00" appears in the display.
"MARK" appears in the display for 2 seconds.
3
Press T MARK to erase the mark.
"MARK OFF" appears in the display. The track mark is erased
and the two tracks are combined.
z
When you erase a track mark, name assigned to the mark is also erased.
Erase a track mark
1 2
1 2
Track numbers decrease
.
X
3 4
3
.
X
T MARK
43
-GB