Sony Walkman MZ-R70 Mode D'emploi page 15

Difference
Recorded track
numbers
Recorded sound
level
1)
When recording a CD or an MD, track numbers are automatically marked in
the order of the original disc.
Note
Track marks may be copied incorrectly:
• when you record from some CD players or multi disc players using digital
(optical) input.
• when the source is in shuffle or program play mode while recording using
digital (optical) input. In this case, play the source in normal play mode.
• when recording BS or CS programs through digital (optical) input.
Digital (optical)
input
Marked (copied)
automatically
• at the same
positions as the
source.
• after more than 2
seconds of blank or
low-level
1)
segment .
• when the recorder
is paused while
recording.
You can erase
unnecessary marks
after recording.
("Erasing a track
mark", page 43).
Same as the source.
Can also be adjusted
manually (Digital
REC level control)
("Adjusting the
recording level
manually
(Manual recording)",
page 21).
Analog (line) input
Marked automatically
• after more than 2
seconds of blank or
low-level segment.
• when the recorder is
paused while recording.
You can erase
unnecessary marks after
recording ("Erasing a
track mark", page 43).
Adjusted automatically.
Can also be adjusted
manually ("Adjusting the
recording level manually
(Manual recording)",
page 21).
15
-GB