Samsung SCC-B5351P Manuel De L'utilisateur page 6

I
Cable connection
1.Connect the BNC cable to the video cable
connector attached on the dome camera,
and connect the remained BNC cable to the
video input terminal of the monitor.
2.Connect the power adaptor at this time.
Connect the DC 12V/AC 24V power cable of
the connector to the power cable connection
that is attached on the dome camera.
Monitor
BNC Cable
8
User Guide
I
Caution
Installation
1. Select an installation location capable of bearing five
times the weight of the product (approx. 5.0Kg)
2. Fix the BRACKET to the location desired with the
supplied SCREWs.
BRACKET
FIXING SCREW
3. Hold the CASE-BOTTOM of the camera with one
hand and use the other hand to rotate the CASE-TOP
approximately 20 degrees in the anti-clockwise
direction to remove it.
CASE-BOTTOM
COVER-CEILING
Make sure to hold the CASE-BOTTOM and not the
COVER-CEILING part when rotating the CASE-TOP.
Otherwise, the internal 360° -Rotation-Preventing system
may get damaged.
9
User Guide
E
CASE-TOP