Techinics Parameters Setting - Vitrifrigo MACS 7 Serie Manuel D'installation

Buzzer setting
Is possible to change the option of buzzer setting, the possible options are:
OFF The acoustic signals are disable
KEY + ALARM
ALARM The acoustic signals are switch on only during the alarm signals
KEYBOARD The acoustic signals are switch on only during the push of capacitive button
Temperature units setting
Is possible to display the temperature units in two different scales °C and °F.
17

TECHINICS PARAMETERS SETTING

The following parameters must be modified only from qualified user. The change of this is
parameters from the user not qualified could the brake of machine.
For to enter in the menu of setting parameters to push the
Immediately you can see the word parameter password (see the image below)
In the case of final user, is possible to use the button
parameters. For exit to the parameter mode, push another time the button
The acoustic signals are switch on during the push of capacitive button and
during the alarm signals
button in the same time of
and
84
you can choice to change the
+ .
.