Vitrifrigo MACS 7 Serie Manuel D'installation page 64

We recommend, to install the machine at a level, that allows the correct flow of the condenser water. It is
necessary to fix (by means of stainless-steel clamps) to the condensate drain, a water tube to discharge the
condenser water to the sea.
If the exhaust motor tube is overboard, it must be at least 1 m away from the exhaust tube
of the motors or generators, the air could be drawn by the fan to the conditioned room. It
could cause risks of intoxication or death.
Fig. 5 (Stainless steel cap on condensate drain)
63